KREUL Zapon lacquer spray
Content: 150 ml Content: 400 ml
All prices plus shipping
All prices plus shipping
Description
The KREUL Zapon Lacquer Spray is a water-bright combination lacquer that can be sprayed on thinly and dries very quickly. Already after 10 minutes, the varnish is dust-dry and after about 2 hours completely dry.
The nitrocellulose lacquer forms an invisible protective film that prevents discoloration, dulling and corrosion on shiny metal surfaces.
With Zaponlack spray you can get into the smallest corner and protect goblets, vases, pitchers, brass, bronze, pewter and iron. This varnish is especially ideal for larger surfaces and curved surfaces.
For indoor and outdoor applications.
Tips to use
Applicable to: Metal, Terracotta / clay, plaster, concrete, creative casting compounds (hardened), precious metal (vases, jugs, brass, Bronze, Pewter, iron).
Apply with:Spray bottle.
Preparations: The surface must be dry, clean, free of grease and oil and free of fingerprints.
Processing of material: Optimal for large surfaces and curved surfaces. Prevents shiny metal surfaces from becoming matt and protects against discolouration. Shake the can for approx. 3 minutes and spray from a distance of approx. 20 - 30 cm.
Time to dry: 10 minutes and completely dry after about 2 hours.
Notices under the CLP Regulation
- H222 - Extremely flammable aerosol.
- H229 - Pressurised container: May burst if heated.
- H319 - Causes serious eye irritation.
- H336 - May cause drowsiness or dizziness.
- Danger
Tips to use
Applicable to: Metal, Terracotta / clay, plaster, concrete, creative casting compounds (hardened), precious metal (vases, jugs, brass, Bronze, Pewter, iron).
Apply with:Spray bottle.
Preparations: The surface must be dry, clean, free of grease and oil and free of fingerprints.
Processing of material: Optimal for large surfaces and curved surfaces. Prevents shiny metal surfaces from becoming matt and protects against discolouration. Shake the can for approx. 3 minutes and spray from a distance of approx. 20 - 30 cm.
Time to dry: 10 minutes and completely dry after about 2 hours.
Notices under the CLP Regulation
- H222 - Extremely flammable aerosol.
- H229 - Pressurised container: May burst if heated.
- H319 - Causes serious eye irritation.
- H336 - May cause drowsiness or dizziness.
- Danger