www.vbs-hobby.com 
Exclusive offersBetonschale mit Krake gestalten
Instructions No. 1889 Instructions No. 1889 Difficulty: Advanced Working time: 2 Hours
This octopus does not only look great, it is also a practical little helper - it watches over your jewellery and keeps it ready for you.
First grease the casting mould with Release agent spray one. This makes it easier for you to remove the casting from later. Mix about 10 tablespoons of concrete with water to a creamy mixture. Pour this into the large mould, press the small mould into the top and weigh everything down with a heavy object, such as a "Let the concrete Stone. set for 24 hours". Carefully remove the bowl from the mould. Grind the edges of the shell with Sandpaper
Then you model an octopus on the shell from the ready-to-use concrete accordingModelling clay to your ideas. Let it dry for 24 hours. Lift the modelled octopus carefully, paint it in Orange Gold and let everything dry thoroughly. Then fix the octopus to the shell with assembly glue
For the stones mix about 10 tablespoons of concrete with water until a creamy mass is created and fill the mass into the mould. Let the concrete dry for 24 hours and then carefully remove the castings from the mould. Now the stones can be designed with colours as desired.
Then you model an octopus on the shell from the ready-to-use concrete accordingModelling clay to your ideas. Let it dry for 24 hours. Lift the modelled octopus carefully, paint it in Orange Gold and let everything dry thoroughly. Then fix the octopus to the shell with assembly glue
For the stones mix about 10 tablespoons of concrete with water until a creamy mass is created and fill the mass into the mould. Let the concrete dry for 24 hours and then carefully remove the castings from the mould. Now the stones can be designed with colours as desired.
